Used Forklift Buyers in Connecticut
We buy used forklifts everywhere in Connecticut — warehouses, plants, lumber yards, job sites and closing facilities. Any brand, any capacity, running or not. Transport is ours and payment happens at pickup.
- 2 Connecticut cities served
- Statewide pickup, freight included
- Fleet liquidations and single units
- Firm written offer inside 24 hours
Offers in 24 hours · Paid at pickup · Transport included
Cash for used forklifts across Connecticut
Selling a forklift in Connecticut is usually harder than it should be. Dealers want trade-ins, not purchases. Auctions take a commission and hold your money for weeks. Scrapyards weigh a $9,000 machine and offer you steel price. We are the fourth option: a buyer who writes a check on the spot and owns the trailer that hauls it away.
We buy fleets as readily as single units. When a Connecticut warehouse closes we will take the whole floor: counterbalance trucks, reach trucks, walkie stackers, chargers, spare battery packs and attachments in one transaction, on one check, with one pickup window.
Connecticut cities we buy in
All 2 Connecticut cities we cover are listed below. Pick yours for local detail, or just call (954) 740-1983 — coverage is statewide regardless of whether your town appears here.
Connecticut forklift values by capacity
Wholesale forklift values are national, not regional — our buyers are dealers, rebuilders and export brokers, so a machine in Connecticut is priced against the same market as one anywhere else. Capacity and condition do the heavy lifting.
| Capacity | Typical offer range | Common application |
|---|---|---|
| 3,000 lb | $1,800 – $6,500 | Light warehouse, retail backroom, single-pallet work |
| 4,000 lb | $2,400 – $8,500 | General warehouse, light manufacturing |
| 5,000 lb | $3,200 – $12,000 | The default American warehouse forklift |
| 6,000 lb | $3,800 – $14,000 | Heavier pallets, lumber, building supply |
| 8,000 lb | $5,000 – $19,000 | Steel, masonry, container unloading |
| 10,000 lb | $6,500 – $24,000 | Heavy manufacturing, pipe, precast |
| 15,000 lb | $9,000 – $34,000 | Mills, marble, heavy fabrication |
| 16,000 lb | $9,500 – $36,000 | Lumber mills, coil handling |
| 20,000 lb | $12,000 – $48,000 | Ports, steel service centers, rail |
| 30,000 lb and up | $18,000 – $95,000 | Container handling, shipyards, heavy industry |
Selling a forklift in Connecticut: the process
- 01
You send the basics
Brand, capacity off the data plate, hour meter reading, and whether it runs. Three photos help: full side view, the data plate, and the meter. Call or use the form — either works.
- 02
We price it the same day
Capacity, hours and condition set the range. Brand, tire type, mast height and attachments move it inside that range. You get a firm written number, normally within 24 hours.
- 03
You accept, we schedule
Pickup is typically two to seven business days out. We survey access from your photos first so the right truck and loading gear arrive the first time.
- 04
Paid on site, we haul it
Cash, certified check or same-day wire before the machine is loaded. Bill of sale is prepared by us. Transport is ours — it never comes off your number.
Four reasons owners take our number
We are the end buyer
Not a broker taking a percentage and not a dealer wanting a trade-in. We buy with our own money and take title, which is why we can commit to a number the same day.
Condition is not a disqualifier
Roughly a third of what we buy will not start. A dead engine lowers the number; it does not zero it out. Mast, carriage, hydraulics, drivetrain and frame steel all carry value.
Transport is on us
Quoted numbers already include freight. We bring the gear to load a machine with flat tires, a dead battery, or one parked behind racking.
Payment happens at pickup
Before the forklift leaves your property. No consignment, no waiting on resale, no retainage held back.
Brands bought in Connecticut
- Toyota forklifts
- Hyster forklifts
- Yale forklifts
- Caterpillar forklifts
- Crown forklifts
- Raymond forklifts
- Clark forklifts
- Nissan / UniCarriers forklifts
- Mitsubishi forklifts
- Komatsu forklifts
- Linde forklifts
- Jungheinrich forklifts
- Doosan / Bobcat forklifts
- Hyundai forklifts
- Taylor forklifts
- Big Joe forklifts
- Genie forklifts
- SkyTrak / JLG forklifts
Connecticut forklift selling questions
Yes, and they are among our highest-value purchases. Genie GTH, SkyTrak, JLG, CAT TL and Gehl units all sell well. On a telehandler we care about boom wear pads, frame and boom welds, hydraulic leaks and tire condition far more than the hour meter.
Yes. Good 24V, 36V, 48V and 80V industrial packs with usable capacity have real value, as do chargers and quality attachments. Send the pack's date code and voltage and whether it still holds a shift.
Because used forklifts are a national and export market, not a local one. Our buyers are dealers, rebuilders and overseas importers, so we are not limited to what a single Connecticut operator will pay this month. That is exactly why we can beat local scrap and local trade-in numbers.
In order: a bent or twisted mast, a cracked frame, flood or fire damage, and a blown transmission. Cosmetics barely matter — faded paint, dents and a torn seat cost very little. Straight steel and a running powertrain are what carry the number.
Yes. Where a scrapyard pays by the ton and stops there, we value the salvageable components first — mast, carriage, pump, valve bank, drive axle, counterweight — and add steel value underneath. That is normally several times a straight scrap ticket on the same machine.
Yes, and it is worth doing. Values move with scrap prices and container rates, so a current number helps you plan a replacement or budget a closure. We will give you the range with no follow-up pressure — call (954) 740-1983 or email mjindustrialsurplus@gmail.com.
Tell us what you have and take a number
Tell us what you have
Fastest route is a phone call — most owners get a number in the first conversation. If you would rather write it out, fill this in and we will reply within 24 hours.
(954) 740-1983