Used Forklift Buyers in Las Cruces
We pay cash for used forklifts in Las Cruces, New Mexico and throughout Dona Ana. Any brand, any capacity, running or not. Firm number within 24 hours, transport on us, payment before the machine leaves your property.
- Serving all of Dona Ana and surrounding areas
- Non-running and damaged units bought
- Single machines through full fleet buyouts
- No inspection, listing or transport fees
Offers in 24 hours · Paid at pickup · Transport included
Cash for used forklifts in Las Cruces, New Mexico
Las Cruces owners call us when a forklift has become a problem instead of a tool. Maybe it failed inspection, maybe the lease ended, maybe the building is being sold. Whatever the reason, we buy it in whatever condition it is in — running well, running badly, or not running at all — and we pay before the machine leaves your property.
Most of what we buy around Las Cruces is 3,000 lb to 15,000 lb counterbalance iron — Toyota, Hyster, Yale, Caterpillar, Crown, Clark, Komatsu and Mitsubishi. We also buy telehandlers, reach trucks, electric pallet jacks and high-capacity mill units. If it lifts a load on forks, it is in scope.
What your forklift is worth in Las Cruces
Offers are built the same way in every market: capacity sets the bracket, condition places you inside it, then hours, brand, tire type and attachments fine-tune the number. The ranges below cover the machines we are called about most often in Las Cruces.
| Capacity | Typical offer range | Where these work |
|---|---|---|
| 3,000 lb | $1,800 – $6,500 | Light warehouse, retail backroom, single-pallet work |
| 4,000 lb | $2,400 – $8,500 | General warehouse, light manufacturing |
| 5,000 lb | $3,200 – $12,000 | The default American warehouse forklift |
| 6,000 lb | $3,800 – $14,000 | Heavier pallets, lumber, building supply |
| 8,000 lb | $5,000 – $19,000 | Steel, masonry, container unloading |
| 10,000 lb | $6,500 – $24,000 | Heavy manufacturing, pipe, precast |
| 15,000 lb | $9,000 – $34,000 | Mills, marble, heavy fabrication |
| 16,000 lb | $9,500 – $36,000 | Lumber mills, coil handling |
How selling a forklift in Las Cruces works
- 01
You send the basics
Brand, capacity off the data plate, hour meter reading, and whether it runs. Three photos help: full side view, the data plate, and the meter. Call or use the form — either works.
- 02
We price it the same day
Capacity, hours and condition set the range. Brand, tire type, mast height and attachments move it inside that range. You get a firm written number, normally within 24 hours.
- 03
You accept, we schedule
Pickup is typically two to seven business days out. We survey access from your photos first so the right truck and loading gear arrive the first time.
- 04
Paid on site, we haul it
Cash, certified check or same-day wire before the machine is loaded. Bill of sale is prepared by us. Transport is ours — it never comes off your number.
Pickup and transport from Las Cruces, NM
Las Cruces sits roughly 1,659 miles from our base in Dania Beach, FL, and that distance does not change your offer. Freight is arranged and paid on our side and is already inside the number we quote. Nothing gets deducted after the fact.
For a standard counterbalance truck we send a tilt-bed or lowboy. High-capacity mill machines over 20,000 lb go out on a permitted load. You do not need a dock and you do not need the machine to drive — we bring winches, skates and forklifts capable of lifting a forklift when it comes to that.
Access gets surveyed from your photos before a truck is dispatched: door height, aisle width, whether the unit is behind racking, whether there is a ramp or a dock face. That is why our pickups usually take under an hour on site.
- County
- Dona Ana
- State
- New Mexico
- Distance from base
- 1,659 mi
- Coordinates
- 32.314, -106.780
- Cities covered in state
- 2
Four reasons owners take our number
We are the end buyer
Not a broker taking a percentage and not a dealer wanting a trade-in. We buy with our own money and take title, which is why we can commit to a number the same day.
Condition is not a disqualifier
Roughly a third of what we buy will not start. A dead engine lowers the number; it does not zero it out. Mast, carriage, hydraulics, drivetrain and frame steel all carry value.
Transport is on us
Quoted numbers already include freight. We bring the gear to load a machine with flat tires, a dead battery, or one parked behind racking.
Payment happens at pickup
Before the forklift leaves your property. No consignment, no waiting on resale, no retainage held back.
Also buying around Las Cruces
We cover the whole Dona Ana area and the wider New Mexico market. If your machine sits in one of these towns, the process and the pricing are identical.
Forklift selling questions — Las Cruces
A verbal number usually comes in the first phone call. A firm written offer follows within 24 hours of receiving photos, the hour meter reading and the data plate. Pickup is typically scheduled within two to seven business days depending on where in New Mexico you are and how many units are involved.
At pickup, before the machine is loaded. Cash, certified check or same-day wire — your choice. We do not do consignment, we do not pay after resale, and we do not hold a retainage. If the machine matches what you described, you are paid on site.
Neither. We buy with our own money and take title ourselves. Brokers list your machine and take a percentage when and if it sells. Dealers want a trade-in against a new purchase. We are the end buyer, which is why we can commit to a number the same day.
Three photos and two numbers. Photos: a full side view, the data plate, and the hour meter. Numbers: the hour reading and the capacity from the plate. Tell us any known faults up front — a disclosed problem is priced in, an undisclosed one gets found at pickup and slows everything down.
Both. Single machines are most of our volume. Fleets get handled as one transaction on one check with one pickup window, and larger groups are worth more per unit because our transport cost per machine falls.
All of them. Toyota, Hyster, Yale, Crown, Raymond, Caterpillar, Clark, Komatsu, Nissan and UniCarriers, Mitsubishi, Linde, Jungheinrich, Doosan, Hyundai, Taylor, Big Joe, Genie and SkyTrak. Brand affects the number but never whether we will buy it — obscure and orphaned brands still have core and steel value.
Tell us what you have and take a number
Tell us what you have
Fastest route is a phone call — most owners get a number in the first conversation. If you would rather write it out, fill this in and we will reply within 24 hours.
(954) 740-1983