Sell My Forklift in Philadelphia
We pay cash for used forklifts in Philadelphia, Pennsylvania and throughout Philadelphia. Any brand, any capacity, running or not. Firm number within 24 hours, transport on us, payment before the machine leaves your property.
- Serving all of Philadelphia and surrounding areas
- Non-running and damaged units bought
- Single machines through full fleet buyouts
- No inspection, listing or transport fees
Offers in 24 hours · Paid at pickup · Transport included
Cash for used forklifts in Philadelphia, Pennsylvania
We pay cash for used forklifts throughout Philadelphia, Pennsylvania. One unit behind the building or forty in a warehouse that is closing — the process is the same. Send photos and the data plate, take a number, and we handle the loading and the transport out of Philadelphia at our expense.
Most of what we buy around Philadelphia is 3,000 lb to 15,000 lb counterbalance iron — Toyota, Hyster, Yale, Caterpillar, Crown, Clark, Komatsu and Mitsubishi. We also buy telehandlers, reach trucks, electric pallet jacks and high-capacity mill units. If it lifts a load on forks, it is in scope.
What your forklift is worth in Philadelphia
Offers are built the same way in every market: capacity sets the bracket, condition places you inside it, then hours, brand, tire type and attachments fine-tune the number. The ranges below cover the machines we are called about most often in Philadelphia.
| Capacity | Typical offer range | Where these work |
|---|---|---|
| 3,000 lb | $1,800 – $6,500 | Light warehouse, retail backroom, single-pallet work |
| 4,000 lb | $2,400 – $8,500 | General warehouse, light manufacturing |
| 5,000 lb | $3,200 – $12,000 | The default American warehouse forklift |
| 6,000 lb | $3,800 – $14,000 | Heavier pallets, lumber, building supply |
| 8,000 lb | $5,000 – $19,000 | Steel, masonry, container unloading |
| 10,000 lb | $6,500 – $24,000 | Heavy manufacturing, pipe, precast |
| 15,000 lb | $9,000 – $34,000 | Mills, marble, heavy fabrication |
| 16,000 lb | $9,500 – $36,000 | Lumber mills, coil handling |
How selling a forklift in Philadelphia works
- 01
You send the basics
Brand, capacity off the data plate, hour meter reading, and whether it runs. Three photos help: full side view, the data plate, and the meter. Call or use the form — either works.
- 02
We price it the same day
Capacity, hours and condition set the range. Brand, tire type, mast height and attachments move it inside that range. You get a firm written number, normally within 24 hours.
- 03
You accept, we schedule
Pickup is typically two to seven business days out. We survey access from your photos first so the right truck and loading gear arrive the first time.
- 04
Paid on site, we haul it
Cash, certified check or same-day wire before the machine is loaded. Bill of sale is prepared by us. Transport is ours — it never comes off your number.
Pickup and transport from Philadelphia, PA
Philadelphia sits roughly 1,002 miles from our base in Dania Beach, FL, and that distance does not change your offer. Freight is arranged and paid on our side and is already inside the number we quote. Nothing gets deducted after the fact.
For a standard counterbalance truck we send a tilt-bed or lowboy. High-capacity mill machines over 20,000 lb go out on a permitted load. You do not need a dock and you do not need the machine to drive — we bring winches, skates and forklifts capable of lifting a forklift when it comes to that.
Access gets surveyed from your photos before a truck is dispatched: door height, aisle width, whether the unit is behind racking, whether there is a ramp or a dock face. That is why our pickups usually take under an hour on site.
- County
- Philadelphia
- State
- Pennsylvania
- Distance from base
- 1,002 mi
- Coordinates
- 39.952, -75.164
- Cities covered in state
- 2
Four reasons owners take our number
We are the end buyer
Not a broker taking a percentage and not a dealer wanting a trade-in. We buy with our own money and take title, which is why we can commit to a number the same day.
Condition is not a disqualifier
Roughly a third of what we buy will not start. A dead engine lowers the number; it does not zero it out. Mast, carriage, hydraulics, drivetrain and frame steel all carry value.
Transport is on us
Quoted numbers already include freight. We bring the gear to load a machine with flat tires, a dead battery, or one parked behind racking.
Payment happens at pickup
Before the forklift leaves your property. No consignment, no waiting on resale, no retainage held back.
Also buying around Philadelphia
We cover the whole Philadelphia area and the wider Pennsylvania market. If your machine sits in one of these towns, the process and the pricing are identical.
Forklift selling questions — Philadelphia
None. No inspection fee, no appraisal fee, no transport charge, no paperwork fee. If you accept our offer you are paid the full amount. If you decline, you owe nothing and we do not call you repeatedly.
Almost never. Repairs rarely return their cost at wholesale — a $2,800 transmission job might add $1,500 to the offer. Two exceptions are worth it: charge or replace a dead battery on an electric unit, and air up flat tires so the machine can be moved. Otherwise sell it as it sits and let us price the fault.
Include everything if you can. Tanks, spare forks, side shifters, fork positioners, clamps, rotators and man baskets all add to the offer. If you want to keep an attachment, say so before we quote so the number reflects the machine without it.
Yes — electric counterbalance trucks, reach trucks, order pickers, walkie stackers and rider pallet jacks. Battery condition drives the number heavily. A healthy pack with a matching charger can be worth more than the truck it sits in, so never scrap an electric unit without calling first.
Yes. Low doors, tight aisles, machines wedged behind racking and units on a second floor with a freight elevator are routine for us. We survey access from your photos before we send a truck so the right equipment shows up the first time.
A simple bill of sale that we prepare. Forklifts are not titled like road vehicles in most states, so there is no DMV process. If the unit is leased or has a lien, we need the payoff or release letter first — we can work directly with the lender if you prefer.
More ways we help Philadelphia owners
Tell us what you have and take a number
Tell us what you have
Fastest route is a phone call — most owners get a number in the first conversation. If you would rather write it out, fill this in and we will reply within 24 hours.
(954) 740-1983