Scrap Forklift Buyers in Fairbanks
We pay cash for used forklifts in Fairbanks, Alaska and throughout Fairbanks North Star. Any brand, any capacity, running or not. Firm number within 24 hours, transport on us, payment before the machine leaves your property.
- Serving all of Fairbanks North Star and surrounding areas
- Non-running and damaged units bought
- Single machines through full fleet buyouts
- No inspection, listing or transport fees
Offers in 24 hours · Paid at pickup · Transport included
Cash for used forklifts in Fairbanks, Alaska
There is a real market for used forklifts, and most owners in Fairbanks never see it because it is a wholesale and export market rather than a local one. That is what we do. We buy your machine directly, then move it to a dealer, a rebuilder, or a container at the port — which is why we can pay more than a scrapyard and move faster than an auction.
Most of what we buy around Fairbanks is 3,000 lb to 15,000 lb counterbalance iron — Toyota, Hyster, Yale, Caterpillar, Crown, Clark, Komatsu and Mitsubishi. We also buy telehandlers, reach trucks, electric pallet jacks and high-capacity mill units. If it lifts a load on forks, it is in scope.
What your forklift is worth in Fairbanks
Offers are built the same way in every market: capacity sets the bracket, condition places you inside it, then hours, brand, tire type and attachments fine-tune the number. The ranges below cover the machines we are called about most often in Fairbanks.
| Capacity | Typical offer range | Where these work |
|---|---|---|
| 3,000 lb | $1,800 – $6,500 | Light warehouse, retail backroom, single-pallet work |
| 4,000 lb | $2,400 – $8,500 | General warehouse, light manufacturing |
| 5,000 lb | $3,200 – $12,000 | The default American warehouse forklift |
| 6,000 lb | $3,800 – $14,000 | Heavier pallets, lumber, building supply |
| 8,000 lb | $5,000 – $19,000 | Steel, masonry, container unloading |
| 10,000 lb | $6,500 – $24,000 | Heavy manufacturing, pipe, precast |
| 15,000 lb | $9,000 – $34,000 | Mills, marble, heavy fabrication |
| 16,000 lb | $9,500 – $36,000 | Lumber mills, coil handling |
How selling a forklift in Fairbanks works
- 01
You send the basics
Brand, capacity off the data plate, hour meter reading, and whether it runs. Three photos help: full side view, the data plate, and the meter. Call or use the form — either works.
- 02
We price it the same day
Capacity, hours and condition set the range. Brand, tire type, mast height and attachments move it inside that range. You get a firm written number, normally within 24 hours.
- 03
You accept, we schedule
Pickup is typically two to seven business days out. We survey access from your photos first so the right truck and loading gear arrive the first time.
- 04
Paid on site, we haul it
Cash, certified check or same-day wire before the machine is loaded. Bill of sale is prepared by us. Transport is ours — it never comes off your number.
Pickup and transport from Fairbanks, AK
Fairbanks sits roughly 3,945 miles from our base in Dania Beach, FL, and that distance does not change your offer. Freight is arranged and paid on our side and is already inside the number we quote. Nothing gets deducted after the fact.
For a standard counterbalance truck we send a tilt-bed or lowboy. High-capacity mill machines over 20,000 lb go out on a permitted load. You do not need a dock and you do not need the machine to drive — we bring winches, skates and forklifts capable of lifting a forklift when it comes to that.
Access gets surveyed from your photos before a truck is dispatched: door height, aisle width, whether the unit is behind racking, whether there is a ramp or a dock face. That is why our pickups usually take under an hour on site.
- County
- Fairbanks North Star
- State
- Alaska
- Distance from base
- 3,945 mi
- Coordinates
- 64.840, -147.710
- Cities covered in state
- 2
Four reasons owners take our number
We are the end buyer
Not a broker taking a percentage and not a dealer wanting a trade-in. We buy with our own money and take title, which is why we can commit to a number the same day.
Condition is not a disqualifier
Roughly a third of what we buy will not start. A dead engine lowers the number; it does not zero it out. Mast, carriage, hydraulics, drivetrain and frame steel all carry value.
Transport is on us
Quoted numbers already include freight. We bring the gear to load a machine with flat tires, a dead battery, or one parked behind racking.
Payment happens at pickup
Before the forklift leaves your property. No consignment, no waiting on resale, no retainage held back.
Also buying around Fairbanks
We cover the whole Fairbanks North Star area and the wider Alaska market. If your machine sits in one of these towns, the process and the pricing are identical.
Forklift selling questions — Fairbanks
In order: a bent or twisted mast, a cracked frame, flood or fire damage, and a blown transmission. Cosmetics barely matter — faded paint, dents and a torn seat cost very little. Straight steel and a running powertrain are what carry the number.
Yes. Where a scrapyard pays by the ton and stops there, we value the salvageable components first — mast, carriage, pump, valve bank, drive axle, counterweight — and add steel value underneath. That is normally several times a straight scrap ticket on the same machine.
Yes, and it is worth doing. Values move with scrap prices and container rates, so a current number helps you plan a replacement or budget a closure. We will give you the range with no follow-up pressure — call (954) 740-1983 or email mjindustrialsurplus@gmail.com.
We come to you. Transport is arranged and paid for by us, and it is already included in the number we quote — nothing is deducted afterward. For a standard counterbalance forklift we send a tilt-bed or a lowboy; for a 20,000 lb and up machine we arrange the permitted load. You do not need a loading dock and you do not need the unit to be running.
Capacity, hours and condition set the range, then brand and tire type move it inside that range. A 5,000 lb LP cushion truck that runs well typically lands between $3,200 and $12,000. The same machine not running is usually $900 to $3,600. High-capacity diesel units run far higher. Our value guide has the full table by capacity and condition grade.
Yes, and it is a large share of what we buy. Non-running units still carry value in the mast, carriage, transmission, hydraulic pump, counterweight and frame steel. We bring the equipment needed to load a dead machine at no cost to you. What we need to know is why it stopped — fuel, electrical, engine, transmission or hydraulic — because that changes the number.
Tell us what you have and take a number
Tell us what you have
Fastest route is a phone call — most owners get a number in the first conversation. If you would rather write it out, fill this in and we will reply within 24 hours.
(954) 740-1983