Bexar · TX · Population 1,359,174

Forklift Fleet Liquidation in San Antonio

We pay cash for used forklifts in San Antonio, Texas and throughout Bexar. Any brand, any capacity, running or not. Firm number within 24 hours, transport on us, payment before the machine leaves your property.

  • Serving all of Bexar and surrounding areas
  • Non-running and damaged units bought
  • Single machines through full fleet buyouts
  • No inspection, listing or transport fees

Offers in 24 hours · Paid at pickup · Transport included

Two large used pneumatic-tire forklifts parked side by side on a Florida equipment lot awaiting export
Plate 01Pair of high-capacity units staged for export
Service areaSan Antonio, TX
Offer window24 hours
Pickup window2–7 days
Transport cost$0 to you
01Selling in San Antonio

Cash for used forklifts in San Antonio, Texas

San Antonio owners call us when a forklift has become a problem instead of a tool. Maybe it failed inspection, maybe the lease ended, maybe the building is being sold. Whatever the reason, we buy it in whatever condition it is in — running well, running badly, or not running at all — and we pay before the machine leaves your property.

Age matters less than owners expect. We regularly buy 1990s and early-2000s machines because parts availability, not model year, drives resale. A 1998 Hyster with a straight mast and a running engine is worth more to us than a newer machine with frame damage.

High-capacity Hyster pneumatic-tire forklift with long forks parked in an industrial yard
Plate 02Hyster high-capacity unit with long forks
02Value guide

What your forklift is worth in San Antonio

Offers are built the same way in every market: capacity sets the bracket, condition places you inside it, then hours, brand, tire type and attachments fine-tune the number. The ranges below cover the machines we are called about most often in San Antonio.

San Antonio, TX — running units. Non-runners are quoted separately.
CapacityTypical offer rangeWhere these work
3,000 lb$1,800 – $6,500Light warehouse, retail backroom, single-pallet work
4,000 lb$2,400 – $8,500General warehouse, light manufacturing
5,000 lb$3,200 – $12,000The default American warehouse forklift
6,000 lb$3,800 – $14,000Heavier pallets, lumber, building supply
8,000 lb$5,000 – $19,000Steel, masonry, container unloading
10,000 lb$6,500 – $24,000Heavy manufacturing, pipe, precast
15,000 lb$9,000 – $34,000Mills, marble, heavy fabrication
16,000 lb$9,500 – $36,000Lumber mills, coil handling
03Process

How selling a forklift in San Antonio works

  1. 01

    You send the basics

    Brand, capacity off the data plate, hour meter reading, and whether it runs. Three photos help: full side view, the data plate, and the meter. Call or use the form — either works.

  2. 02

    We price it the same day

    Capacity, hours and condition set the range. Brand, tire type, mast height and attachments move it inside that range. You get a firm written number, normally within 24 hours.

  3. 03

    You accept, we schedule

    Pickup is typically two to seven business days out. We survey access from your photos first so the right truck and loading gear arrive the first time.

  4. 04

    Paid on site, we haul it

    Cash, certified check or same-day wire before the machine is loaded. Bill of sale is prepared by us. Transport is ours — it never comes off your number.

04Logistics

Pickup and transport from San Antonio, TX

San Antonio sits roughly 1,145 miles from our base in Dania Beach, FL, and that distance does not change your offer. Freight is arranged and paid on our side and is already inside the number we quote. Nothing gets deducted after the fact.

For a standard counterbalance truck we send a tilt-bed or lowboy. High-capacity mill machines over 20,000 lb go out on a permitted load. You do not need a dock and you do not need the machine to drive — we bring winches, skates and forklifts capable of lifting a forklift when it comes to that.

Access gets surveyed from your photos before a truck is dispatched: door height, aisle width, whether the unit is behind racking, whether there is a ramp or a dock face. That is why our pickups usually take under an hour on site.

Coverage detail
County
Bexar
State
Texas
Distance from base
1,145 mi
Coordinates
29.425, -98.495
Cities covered in state
2
05Why sell to us

Four reasons owners take our number

01

We are the end buyer

Not a broker taking a percentage and not a dealer wanting a trade-in. We buy with our own money and take title, which is why we can commit to a number the same day.

02

Condition is not a disqualifier

Roughly a third of what we buy will not start. A dead engine lowers the number; it does not zero it out. Mast, carriage, hydraulics, drivetrain and frame steel all carry value.

03

Transport is on us

Quoted numbers already include freight. We bring the gear to load a machine with flat tires, a dead battery, or one parked behind racking.

04

Payment happens at pickup

Before the forklift leaves your property. No consignment, no waiting on resale, no retainage held back.

06Nearby

Also buying around San Antonio

We cover the whole Bexar area and the wider Texas market. If your machine sits in one of these towns, the process and the pricing are identical.

09FAQ

Forklift selling questions — San Antonio

Include everything if you can. Tanks, spare forks, side shifters, fork positioners, clamps, rotators and man baskets all add to the offer. If you want to keep an attachment, say so before we quote so the number reflects the machine without it.

Yes — electric counterbalance trucks, reach trucks, order pickers, walkie stackers and rider pallet jacks. Battery condition drives the number heavily. A healthy pack with a matching charger can be worth more than the truck it sits in, so never scrap an electric unit without calling first.

Yes. Low doors, tight aisles, machines wedged behind racking and units on a second floor with a freight elevator are routine for us. We survey access from your photos before we send a truck so the right equipment shows up the first time.

A simple bill of sale that we prepare. Forklifts are not titled like road vehicles in most states, so there is no DMV process. If the unit is leased or has a lien, we need the payoff or release letter first — we can work directly with the lender if you prefer.

Sometimes, on a clean late-model machine in a strong month. But auctions charge seller commission plus lot fees, you pay to get the unit there, payment lands 30 to 45 days out, and there is no floor — we have seen good forklifts hammer at a third of expectation. Our number is fixed and paid at pickup, which is why most owners take it.

Regularly. Dealers sell us trade-ins they do not want to recondition, and rental companies sell us units coming off fleet. We can work on a standing arrangement with monthly pickups if you have consistent volume.

11Get an offer

Tell us what you have and take a number

Request a cash number

Tell us what you have

Fastest route is a phone call — most owners get a number in the first conversation. If you would rather write it out, fill this in and we will reply within 24 hours.

(954) 740-1983

No obligation. We do not resell your information.